TC2030-CTX-ETM
$59.00
20 pin ARM Cortex cable (0.05″ pitch) with 6-pin Tag-Connector for SWD and an additional 10-pin TC2050 connector providing the extended trace signals.
AVAILABLE
Description
TC2030-CTX-ETM is a TC2030-CTX-20 programming cable with 6-pin Tag-Connector for SWD and an additional 10-pin TC2050 connector connected to pins 11-20 providing the extended trace signals.
The pin numbering for pins 11-20 of the 0.05″ pitch 20-pin Cortex maps to the TC2050 pin numbering as follows (TC2050 pins are numbered like a DIP IC).
| TC2050 pin no. | Cortex 20-pin |
|---|---|
| 1 | 11 GND/TgtPwr+cap |
| 2 | 13 GND/TgtPwr+cap |
| 3 | 15 GND |
| 4 | 17 GND |
| 5 | 19 GND |
| 6 | 20 TRACEDATA[3] |
| 7 | 18 TRACEDATA[2] |
| 8 | 16 TRACEDATA[1] |
| 9 | 14 TRACEDATA[0] |
| 10 | 12 TRACECLK |
| TC2030 pin no. | SWD signal |
|---|---|
| 1 | 1 VCC |
| 2 | 2 SWDIO |
| 3 | 10 nRESET |
| 4 | 4 SWCLK |
| 5 | 3,5,9 GND |
| 6 | 6 SWO |
Please Note: Be sure to follow manufacturer’s advice on signal integrity and termination during design and layout.
This product is used in the following debugger/device solutions:
This product is used as part of the following solutions for particular debuggers, protocols and devices. Solutions may involve additional cables, adapters or retaining clips, as well as this product you are viewing now. Click on the solution links to see full solutions and installation instructions where applicable.
IAR I-JET for ARM Cortex using SWD + ETM
Cortex-20/MIPI-20 Generic for ARM Cortex using SWD + ETM
ARM Keil ULINK Pro for ARM Cortex using SWD + ETM
