TC2030-NL-FTDI-C232HD-DDHSP-0-DTR USB to TC2030 No Legs Serial Cable
$74.00
FTDI’s C232HD-DDHSP-0 to USB Serial Converter cable fitted with a TC2030 6-pin “No Legs” Tag-Connector using DTR instead of CTS.
AVAILABLE
Description
This product is FTDI’s C232HD-DDHSP-0 to USB Serial Converter cable fitted with a TC2030 “No Legs” Tag-Connector with DTR connected to the TC2030 pin 2 instead of CTS. This tiny footprint TC2030 debug connector requires no mating-half connector on the PCB saving target board cost and space.
FTDI-C232HD-DDHSP-0 Specification
VCC: 3.3V
VCC Max current: 250mA
UART TTL level signals: 3.3V
Data rates: 12Mbps
Notes: FT232H based Hi-Speed 480Mbps. This cable has DTR (gray) connected to pin 2 instead of CTS (brown).
Nominal cable length: 5.9ft/1.8m.
See also the legged version TC2030-FTDI-C232HD-DDHSP-0-DTR or the same no-legs version of this cable but with CTS connected instead of DTR TC2030-NL-FTDI-C232HD-DDHSP-0. For details of the full range of Tag-Connect FTDI test cables , see the FTDI test cables range summary and full list of available FTDI family cables.
TC2030 Connections
| TC2030 pin | FTDI Signal | Type | Description |
|---|---|---|---|
| 1 | VCC (RED) | Output | Power supply output |
| 2 | DTR (GRAY) | Output | Data Transmit Ready modem signalling line |
| 3 | RXD / TDI (YELLOW) | Input | Receive Asynchronous Data input |
| 4 | TXD / TCLK (ORANGE) | Output | Transmit Asynchronous Data output |
| 5 | GND (BLACK) | GND | Device ground supply pin |
| 6 | RTS / TDO (GREEN) | Output | Request To Send Control Output / Handshake signal |
